DOTcard Core Indents
DOTcard2130 Core Idents
Product Overview
The DOTcard2130 two-part sleeve and core ident system is probably the most popular way
of identifying instrumentation wiring across the world today.
The system is made up of a transparent sleeve, the DOTsleeve, which has one recess for the wire / cable and one recess for the DOTcard2130 core ident. No more having to disconnect, reconnect and retest the circuit to change a heatshrink label or other type of marker, simply slide the old label out of the DOTsleeve then slide the new label in.
The DOTcard System can print up to 7,200 of the DOTcard2130 core idents per hour and uses the same thermal transfer DOTcard System Printer and DOTlabel Software as which prints the full range of DOT cable markers. The software enables you to import information direct from Word and Excel, saving enormous amounts of labour time and money in reduced production times.
The DOTcard2130 core identification system has numerous
features and benefits such as:
• Thermal printer producing up to 7,200 core idents per hour
• Easy to use DOTlabel Software, which can import information direct from Word & Excel
• Easy to install ‘slide in and break off’ DOTcard2130 and DOTsleeve system
• Clear, easy to read text or numbers, even on small cores
• No heat gun required
• Label can be changed even after termination
• The DOTcard2130 core idents are ex-stock and available for immediate despatch.
Technical Data
DOTsleeve21 or DOTsleeve30 Transparent Sleeves
Product Overview
The transparent DOTsleeve has two recesses, one for the wire / cable and one for the label. The DOTcard2130 core identification system has two distinct advantages over other systems available on the market today. The first being that should the core ident require changing after the wire has been connected, simply slide the old label out before sliding the new one in. There’s no need to disconnect, reconnect and retest the circuit.
The second advantage is that should the information to be printed onto the DOTcard2130 core idents not be available at the time the Engineers are ready to connect the wires and test the circuit, the Engineers can simply slide the DOTsleeves into place, connect the wires and test the circuit and the printed core ident can be slid into the DOTsleeve as and when the information becomes available. This cannot be done if a heatshrink labelling system is being used.
Both the DOTsleeve21 and the DOTsleeve30 are available in a range of core diameters (see table below) and are manufactured from a flexible PVC for ease of installation. All sizes of the DOTsleeves are ex-stock and available for immediate despatch.
Product Overview
The DOTcard2130 two-part sleeve and core ident system is probably the most popular way
of identifying instrumentation wiring across the world today.
The system is made up of a transparent sleeve, the DOTsleeve, which has one recess for the wire / cable and one recess for the DOTcard2130 core ident. No more having to disconnect, reconnect and retest the circuit to change a heatshrink label or other type of marker, simply slide the old label out of the DOTsleeve then slide the new label in.
The DOTcard System can print up to 7,200 of the DOTcard2130 core idents per hour and uses the same thermal transfer DOTcard System Printer and DOTlabel Software as which prints the full range of DOT cable markers. The software enables you to import information direct from Word and Excel, saving enormous amounts of labour time and money in reduced production times.
The DOTcard2130 core identification system has numerous
features and benefits such as:
• Thermal printer producing up to 7,200 core idents per hour
• Easy to use DOTlabel Software, which can import information direct from Word & Excel
• Easy to install ‘slide in and break off’ DOTcard2130 and DOTsleeve system
• Clear, easy to read text or numbers, even on small cores
• No heat gun required
• Label can be changed even after termination
• The DOTcard2130 core idents are ex-stock and available for immediate despatch.
Technical Data
| Card size: | 86mm x 54mm |
| Material: | HIPS |
| Marking: | Thermal Transfer |
| Colour: | White (other colours can be made to order - M.O.Q. will apply) |
DOTsleeve21 or DOTsleeve30 Transparent Sleeves
Product Overview
The transparent DOTsleeve has two recesses, one for the wire / cable and one for the label. The DOTcard2130 core identification system has two distinct advantages over other systems available on the market today. The first being that should the core ident require changing after the wire has been connected, simply slide the old label out before sliding the new one in. There’s no need to disconnect, reconnect and retest the circuit.
The second advantage is that should the information to be printed onto the DOTcard2130 core idents not be available at the time the Engineers are ready to connect the wires and test the circuit, the Engineers can simply slide the DOTsleeves into place, connect the wires and test the circuit and the printed core ident can be slid into the DOTsleeve as and when the information becomes available. This cannot be done if a heatshrink labelling system is being used.
Both the DOTsleeve21 and the DOTsleeve30 are available in a range of core diameters (see table below) and are manufactured from a flexible PVC for ease of installation. All sizes of the DOTsleeves are ex-stock and available for immediate despatch.
DOTgroup International is the UK’s leading independent manufacturer and supplier of Electrical, Instrumentation, Mechanical and Safety Labelling and Identification Solutions in the following industries:
•..Oil & Gas..•..Power..•..Ship Building..•..Petrochemical..•..Renewable Energy..•..Building Services
•..Oil & Gas..•..Power..•..Ship Building..•..Petrochemical..•..Renewable Energy..•..Building Services
Tel: +44 (0)1582 703 703..........Fax: +44 (0)1582 703 700..........Email: sales@DOTgroup.net
DOTgroup International – manufacturer and supplier of Electrical, Instrumentation, Mechanical & Safety Labelling & Identification Systems, produce the following products:
Cable Marking – DOTcard Cable Markers, DOT-FCM Flexible Cable Markers, DOT-SSCM Stainless Steel Cable Markers, DOT Manual Cable Markers, DOTwrap4x2 Wraparound Labels.
Core Identification – DOTcard Core Idents, DOTshrink Heatshrink Tubing, DOT-PHC Portable Heatshrink Tubing, DOT Manual Core Idents, DOT-SFC Slim Fix Clips
Printers, Accessories & Consumables – DOTcard System Printer, DOT-FCM / DOTshrink System Printer, DOT-LEM35 Laser Engraving System,
DOT-PHP Portable Heatshrink Printer, DOT-SFC Slim Fix Clip System Printer
Engraved Labels – DOT-SSCM Stainless Steel Cable Markers & DOT-SSDT Stainless Steel Dog Tags, DOTlaser Flexible Engraved Labels, DOT-REL Rigid Engraving Laminate Labels,
DOT Bespoke Engraved Labels & Signs
Cable Ties/Cable Straps – DOT-NCT Nylon Cable Ties, DOT-CNCT Coloured Nylon Cable Ties, DOT-SSCT Stainless Steel Cable Ties, DOT Stainless Steel Cable Straps, DOT Cable Strap Cushion Sleeve
Pipeline Identification – DOT Heavy Duty Pipeline Identification Tape
Underground Cable Protection Covers & Warning Tape – DOT-UCPC Underground Cable Protection Covers, DOT-UCPR Underground Cable Protection Rolls,
DOT-UWT Underground Warning Tape, DOT-UWDT Underground Wire Detectable Tape.
Civils – DOT-CCPC Concrete Cable Protection Covers, DOT Concrete Marker, Hydrant Indicator & Indicator Posts, DOT Concrete Marker Blocks, DOT Bespoke Concrete Products.
Fire, Safety, Hazardous Area & General Warning Signs, Pre-Printed Labelling Service
Cable Marking – DOTcard Cable Markers, DOT-FCM Flexible Cable Markers, DOT-SSCM Stainless Steel Cable Markers, DOT Manual Cable Markers, DOTwrap4x2 Wraparound Labels.
Core Identification – DOTcard Core Idents, DOTshrink Heatshrink Tubing, DOT-PHC Portable Heatshrink Tubing, DOT Manual Core Idents, DOT-SFC Slim Fix Clips
Printers, Accessories & Consumables – DOTcard System Printer, DOT-FCM / DOTshrink System Printer, DOT-LEM35 Laser Engraving System,
DOT-PHP Portable Heatshrink Printer, DOT-SFC Slim Fix Clip System Printer
Engraved Labels – DOT-SSCM Stainless Steel Cable Markers & DOT-SSDT Stainless Steel Dog Tags, DOTlaser Flexible Engraved Labels, DOT-REL Rigid Engraving Laminate Labels,
DOT Bespoke Engraved Labels & Signs
Cable Ties/Cable Straps – DOT-NCT Nylon Cable Ties, DOT-CNCT Coloured Nylon Cable Ties, DOT-SSCT Stainless Steel Cable Ties, DOT Stainless Steel Cable Straps, DOT Cable Strap Cushion Sleeve
Pipeline Identification – DOT Heavy Duty Pipeline Identification Tape
Underground Cable Protection Covers & Warning Tape – DOT-UCPC Underground Cable Protection Covers, DOT-UCPR Underground Cable Protection Rolls,
DOT-UWT Underground Warning Tape, DOT-UWDT Underground Wire Detectable Tape.
Civils – DOT-CCPC Concrete Cable Protection Covers, DOT Concrete Marker, Hydrant Indicator & Indicator Posts, DOT Concrete Marker Blocks, DOT Bespoke Concrete Products.
Fire, Safety, Hazardous Area & General Warning Signs, Pre-Printed Labelling Service
DOTgroup manufacture and supply Electrical, Instrumentation, Mechanical & Safety Labelling & Identification Systems to the following industries: Oil & Gas, Petrochemical,
Power / Renewable Energy, Mining, Building Services, Transportation, Ship Building and Pharmaceutical.
© copyright DOTgroup.net Website by: www.jelprint.com